Using Methord 1. Left and right knob adjust the mounting pressure mounting both sides of the rubber roller pressure should be equal. Should turn knob up and down two rubber rollers separation, then cold laminating film must be mounted on objects placed between the upper and lower rubber roller, turn the knob to drop on the roller, to ensure that under the rubber roller parallel to collide, slightly increase pressure can not be too much pressure to avoid bubbles in mounting. 2. Turn the knob clockwise to increase the pressure; inverse turn the knob, and reduce stress Maintain: 1. Caution: KT board, plastic board and hard mounting of heavy material, is strictly prohibited on the same machine both at the same time the mounting of pictures, photos and other thin items, otherwise it will affect the mounting effects of the items. 2. The rubber roller cleaning with a soft cloth dipped in alcohol or gasoline scrub with a dry cloth, scrub with other cleaning agents is strictly prohibited, and definitely not with sheet metal and other hard materials. 3. Although this machine uses a special formulation process, with first-class, high elasticity and protect aging. However, when not used for a long time, then keep the upper and lower rubber roller separate, to prevent the rubber roller long deformation in the extrusion Item Include:#026211 One Set 29.5In Cold Laminating Machine