This machine adopts the printing screen frame height positioning structure, the front part is equipped with the parallel placement plat. Printing materials and tools such as ink buckets can be placed on the back board of the main machine. Installation Methods of the Screen Plate Place the screen frame into the rear support plate from the bottom of the installation table. Move the front of the frame to the front support plate, tighten four Screws to fix the screen frame.Installation Methods of Scraping and Ink Recover ScraperPut in the scraper rubber, the lower edge of the scraper and the mesh surface will fit smoothly and smoothly.Fix the following three screws (don't tighten them); tighten the top two white knobs to fix the scraper.Push and pull handle can be installed vertically or in parallel according to the operator's needs.The machine has been fully adjusted before leaving the factory. The customer only needs to install the spring and screen frame landing board for use.The main body of the machine uses advanced electrostatic spraying metal surface treatment, acid and alkali resistance, corrosion resistance, clean resistance, no rust, can be used for a long time; Some parts are made of stainless steel and aluminum alloy. Item include:3.15" Cylinder Screen Printing Machine Cylindrical Silk Screen Printing Press(006595)