DescriptionIf you're seeking to enhance your ability to bend metal easier and faster, then you simply cannot go wrong with our pan and box brake made of high-quality metal. With its maximum 24" width capacity and 0-135° bending angles, you'll be able to achieve a variety of metal bending needs with ease and speed.ApplicationIt can be used to bend carbon steel, copper plate, aluminum plate, soft aluminum, and other various metal sheets into a desired shape at a set angle. It is suitable for manufacturing a variety of sheet metal products such as metal roofs, car doors, windows, furniture, and so on.SpecificationModel: W-2420AColor: Deep GreyMaterial: MetalProcess: Spray MoldingAssembly Required: YesMounting Type: Floor StandingBending Angle: 0-135°Capacity: 20Ga Mild Steel Plate(1-24inch)5 Fingers Size:2× 2", 4× 3", 2× 4"Maximum Width Capacity: 610mm/24inBending Carbon Steel Thickness: Within 1mm/0.04inBending Stainless Steel Thickness: Within 0.8mm/0.03inBending Copper Plate Thickness: Within 1.2mm/0.047inBending Soft Aluminum Thickness: Within 1.5mm/0.06inProduct Size: 83*22*43cm/32.68*8.66*16.93inPackage Size: 90*31*47cm/ 35.43*12.2*18.5inGross Weight: 45kg/99.2 lbsPackage Included1* Pan and Box Brake2* Handles1* Screw Rod1* English ManualNotes1. Please read the instructions carefully before use and pay special attention to the safety tips inside.2. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.