Finished Machine Test:1.Turn on the machine and let it heat up to 200℃.2.Keep the temperature at 200℃ for at least half an hour.How to Operate:1.Adjust the pressure: Lift the handle and turn the pressure control knob to get the desired pressure.2.Set temperature and time: Lift the handle and turn on the machine. Set the required temperature and time and wait for the digital controller to reach the target temperature.3.Transfering: Put the T-shirts on the bottom working plate, put your transfer paper facing down to the T-shirts, press down the handle, and start to transfer.4.If the cold tearing hot paper is finished, please wait for 15-20 seconds before tearing off the hot paper. If it is hot tearing hot paper, please tear off the hot paper immediately after hot stamping (tear diagonally along the grain of the clothes). Successful heat press requires the correct time, temperature, and pressure. 5.The final effect of the heat press depends on the thickness&type of material and the type of hot stamping paper.6.Different types of heat presses should be tested in advance and the best heat press time and temperature should be determined before mass production.7.DIY transfer completed: Lift the handle when the alarm buzzes, and you can get custom wonderful DIY T-shirts.Specifications:Color: BlackMaterial: Iron, AluminiumTreatment: Teflon CoatingSpecial Feature: AdjustablePlug: US StandardVoltage: 110VFrequency: 60HzPower: 1400WTemperature Range: 0-250℃/32-482℉Time Range: 0-999 SecondsPower Cable Length: 1.5m/4.9ftWorking Size(L*W): 50*40cm/16*20inchProduct Size: 52.5*62*35cm/20.67*24.41*13.78inchGross Weight: 28.35kg/62.5lbsPackage Included:1* Heat Press Machine1* English Manual