SpecificationsColor: OrangeMaterial: Plastic + MetalVoltage: 12vBattery: Lithium Ion BatteriesBattery Capacity: 4500 MahBattery Charging Time: 1.5 Hours Full FillingTying Wire Diameter: 0.8mmTying Wire Length: More than 110 MApplicable Scope of Steel Strapping: 8mm - 34mmKnot Wire Length: 300 - 500mmKnot Number per Charge: 1500 TimesKnot the Required Time: 0.8 Seconds at a TimeMachine Size: 275 Mm * 65 Mm * 240 Mm / 10.83''X2.56''X9.45''(Appr.)Tool Box Size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch)Tying Wire Installations1. in the State of Start-up, Press the Locking Plate of the Opening Wire Plate, Open the Plate Cover.2. Take out the Tying Wire, Tear the Packaging Film, Pull Straight Wire Head About 10 Cm, Load into the Binding Machine in the Clockwise Direction, the Wire Head into the Guide Tap Tube.Note: Clench the Wire Plate When Tear the Packaging Film, Do Not Let the Wire Loose. If the Wire Is Free to Disperse, It Will Lead to the Spread of the Wire Stuck in the Wire Plate.3. Insert the Head of the Wire Guide into the Tap Pipe Until It Is Resisted.4. Cover the Plate and Fasten the Locking Piece.5. Pinch the Wire Forward with Two Fingers, Press and Hold the Switch and Send the Wire out.6. If You Want to Take out the Wire Plate When Finished, Press and Hold the Locking Piece, Open the Wire Plate Cover Plate, Holding the Wire Tray to the Side and Pull out.Package Included:1x Tying Machine1x Pliers1x Charger1x Storage Box2x Lithium Ion Batteries1x Tying Wire in the Machine (Tying Wire Standard: About 0.8 Mm X 110 M/Roll)