Specification: Item Type: Table Saw Material: Metal Uses: Mini table saw, diy woodworking jade chainsaw table grinder, multi-functional small cutting and polishing Strong power, CW/CCW function, precise flexible shaft, multifunctional table grinding. Upgrade the maximum cutting depth, 40MM cutting depth is much higher than other micro table saws on the market. The more teeth, the slower the cutting but the smoother the cut surface without burrs. The material of the belt pulley is fine and fine, and the use of fine teeth makes the transmission more stable and the noise is greatly reduced. The rate reduction ratio of the belt pulley is improved from the original 2 times reduction to 3 times reduction. Rated Rate: 1000RPM Maximum Cutting Thickness: Approx. 40mm / 1.6in Chuck Range: Approx. 1.5-10mm / 0.1-0.4in Angle Adjustment: 0-90 Degrees Flexible Shaft Chuck Range: Approx. 1.0-3.2mm / 0-0.1in Product: Length: Approx. 24cm / 9.4in Width: Approx. 22cm / 8.7in Saw Surface Height: Approx. 13.5cm / 5.3in Package List: 1 x Table Saw(table saw surface is separate, there is no mounting screw, it can be divided into two halves)1 x Power Cable 1 x Adapter 1 x Golden Grinding Wheel 5 x Frosted Sheet 1 x Lint Piece 1 x Fine Tooth Saw Blade 1 x Green Grinding Wheel 1 x Sticky Wheel 1 x Sponge Sheet 2 x Small Black Screws 1 x Silver Metal Accessories 3 x Wheel Pate 1 x Sanding Pate 3 x Hex Wrench 1 x T-Wrench1 x Big Tooth Saw Blade 1 x Screwdriver 1 x Acrylic Sheet 1 x Big Screw 7 x Small Screw 1 x Metal Gasket 1 x White Plastic Accessories 1 x Black Rubber Accessories