★Features：✔Brand New and high quality.✔ Compact size, lightweight, easy to grab.✔ It can save 3-5 times than man power by hand.✔ Rebar Tier is a hand held machine used to pack rebars quickly.✔ It is a miniature motor tool has the trait of safety and credibility.✔ Used for building market, including civil building, floor pipe, heating floor mesh, steel bar, etc.✔ Reasonable structure, advanced craft, simple and convenient operation, high efficiency and convenient maintenance.★Operation Instructions：1. The rebar tirer's jaws are stuck to the intersection of the steel bars, and the steel bars are hooked at 45 degree angles.2. Press the start switch, the rebar tirer machine carries on the work (spins, hinges tightly, cuts off)3. When automatic completion, the jaw from the steel bar intersection and then pull back, complete the process and prepare for the next binding.4. When the binding process is not completed, do not unplug the machine in advance, otherwise it will cause the bundling of the goods tied skidding.★Operating Skills：1. In use, the left tilt 45 degrees after banding, the next time the banding into a right tilt 45 degrees banding, left and right alternately banding.2. When the machine is about to tighten, the machine will appear slightly shaking, while holding the hand of the machine not too tight, you can relax properly.★Package included:1X Tying Machine1X Pliers1X Charger 1X Storage Box2X Lithium Ion Batteries1X Tying Wire in the machine (Tying Wire Standard: About 0.8 mm x 110 m/roll)