SpecificationsColor: RedMaterial: Aluminum, Plastic, Silicone, Steel, CopperCertificate: EPAHandle Type: 3-Position HandlePower Source: Gasoline PoweredStarter System: Hand Pull StartCarburetor Type: DiaphragmEngine Type: 36x32mm/1.41x1.25inch, Single Cylinder, Air Cooling, 2-Stroke Fuel: Oil Mixture (Gasoline: Engine Oil=25:1)Fuel Tank Capacity: 0.9L/30.4Oz/0.237GalMeasuring Cup Capacity: 100ml/3.38OzDisplacement: 33ccNoise: 74.6db (Idle); 104db (Load)Max. Power and Speed: 0.9KW/7000r/MinMax. Torque and Speed: 1.45N.m/5300r/MinFuel Consumotion Rate: ≤0.5L/16.9Oz/0.13Gal/hOutput Speed: 450-800r/MinThread Type: M22 to 1-1/4-7Max. Chuck Size: 130mm/5.12inchMax. Drilling Diameter: ＜130mm/5.12inchProduct Size: 23x25x63cm/9.06x9.84x24.80inchNet Weight: 7.3kg/16.09 lbsGross Weight: 9kg/19.84 lbsPackage Included1x Tapping Machine1x Measuring Cup 1x Funnel1x Screen1x Tool Bag1x English ManualOther Accessories for UseNotes1. The product does not come with drill bits and chisels, you need to prepare them yourself. 2. Please pay attention to whether the oil inlet pipe is full of oil before use.3. After starting up, you need to empty the throttle and let the machine start for a while before starting work.4. The carburetor must be cleaned after every 100 hours of operation before use. The air filter sponge must be cleaned after 36 hours of operation.5. Please read the operating manual completely before use. And pay particular attention to the safety instructions included.