Specification:color: OrangeMaterial: Plastic + MetalVoltage: 12VBattery: Lithium-ion batteryBattery capacity: 4500 mAhBattery charging time: 1.5 hours when fully chargedTie wire diameter: 0.8mmStrapping line length: more than 110 mApplicable scope of steel belt: 8mm-34mm (0.315-1.34inch)Connection length: 300-500mmNumber of knots per charge: 1500 timesTime required to complete: 0.8 seconds each timeMachine size: 275 mm * 65 mm * 240 mm / 10.83"x2.56"x9.45" (approximately)Tool box size: 42cm (16.54inch) *30cm (11.81inch) *10cm (3.94inch)Instructions:1. Reinforced tire claws are stuck at the intersection of steel bars, and the steel bars are hooked at a 45-degree angle.Note: There are no obstacles between the jaws and the wire.2. Press the start switch, the reinforced tire mill will work (rotate, tighten the hinge, cut off)Note: Press only one button at a time, do not detect the jaw during work.3. After the automatic completion, pull the jaws out from the intersection of the steel bars, and then pull them back to complete the process and prepare for the next binding.4. When the binding process is not completed, please do not unplug the machine power cord in advance, otherwise the bundled goods will slip.Note:Due to manual measurement, please allow an error of 1-3cm.Please understand that due to the different positions of the pictures, there may be chromatic aberrations in the colors.Package Included:1X strapping machine1X clamp1X charger1X storage box2X lithium ion battery1X strapping wire in the machine (standard of strapping wire: about 0.8 mm x 110 m/roll)